Ultrasonic Garage Parking Sensor with Three-Color LED

A Clear Cue When You Pull In

The ultrasonic sensor changes the display from green to yellow to red as you approach your garage parking spot.

01 Read the Signal: One Display. Three Cues.

Green: Approach slowly while the way is clear.
Yellow: You're getting close. Slow down.
Red: Stop the vehicle.

Use the lights as a cue while watching the area around your vehicle. You control the brakes.

02 Set Your Stop Point: Save the Spot That Works for You

Park where you want the red cue to appear, then press Set Distance. Test the lights on a slow approach before using the aid regularly.

03 Mount It in Your Garage: Tape or Screw Mounting

Choose the included tape or mounting hardware. Place the display where you can see it from the driver's seat and position the wired sensor facing the vehicle.

04 Power and Setup: Plug It in or Use Batteries

Use the included AC adapter or supply three AAA batteries. The cable connects the sensor head to the display in either power mode.

In the Box

One LED display, one wired ultrasonic sensor head, an AC adapter, three double-sided tape strips, three screws, three anchors and a setup guide.

Product Details

Display: Green, yellow and red LEDs
Sensor: Wired ultrasonic head
Power: AC adapter or three AAA batteries
Mounting: Double-sided tape or screws and anchors

Common Questions

Can I change the stop point later?
Yes. Simply re-park your vehicle where you want the new stop point and press the Set Distance button again.

Do I need a wall outlet?
No. You can plug it into an outlet using the AC adapter, or use three AAA batteries for a wire-free power option.

Does battery mode use the sensor cable?
Yes. The sensor head must remain connected to the display via the cable to transmit the distance signals, regardless of the power source.